Homer Shack Hub

Tag: DIY

  • The $5,000 Siding Mistake: Why the BC Rain Always Wins

    The $5,000 Siding Mistake: Why the BC Rain Always Wins

    Last updated: May 8, 2026

    In British Columbia, we do not just build houses. We build umbrellas that people happen to live in.

    I have seen a lot of guys come up from the south or move from the prairies thinking they can apply the same fast-and-dry rules here. They cannot. In this climate, if you skip a detail to save twenty minutes, the sky will send you a bill for five grand two years later.

    The quick answer

    Never trust the look of a finished wall. The most important parts of your house are the ones you cannot see once the siding is on.

    If your flashing is not layered like shingles and your rain screen is not breathing, you are not building a wall. You are building a sponge.

    Human Salt: The Friday Rush Disaster

    I remember a job site on the Island where a crew was racing to finish a cedar siding install before a massive November storm rolled in.

    They were buttoning up the window trim, and I saw the lead hand skip the head flashing because “the overhang was deep enough.” He figured the porch roof would keep the water away.

    He saved about 15 minutes of work and about $20 in materials.

    Two winters later, I got a call to look at a soft spot under that same window. Because the wind on the coast does not just fall, it blows sideways and up, the water had been driven right into the top of that window frame.

    Without that $20 piece of flashing, the water sat against the sheathing. By the time they saw the bubble in the interior paint, the structural studs were the consistency of wet oatmeal.

    The repair bill for the rot, the mold remediation, and the new siding was just over $5,000.

    The mistake people make

    They think waterproof means tight.

    They caulk every gap until the house cannot breathe. In BC, you do not try to stop the water completely. You manage it. You give it a clear, gravitational path to get out.

    The better move

    1. Follow the shingle rule. Everything must overlap. The top layer always goes over the bottom layer. Reverse-lapped building wrap is a future repair bill.
    2. Respect the rain screen. In BC, that gap between your wrap and siding lets air circulate and moisture dry.
    3. Treat flashing like king. Do not rely on caulk. Caulk fails. Metal flashing and good peel-and-stick tape are what stand up to a 48-hour Island soak.
    4. Remember the wind factor. Coastal rain moves sideways. Overhangs are only a suggestion to the wind.

    Watch the line

    If a contractor tells you they can save money by skipping the rain screen or using a cheap wrap that is not right for our humidity, show them the door.

    They are not saving you money. They are deferred-financing a disaster.

    Homer’s bottom line

    You can cheat a building inspector, and you can cheat a timeline, but you cannot cheat the clouds.

    Do it right the first time, or get ready to pay the BC Rain Tax in three years.

    Doing it right means having the right permit and the right plan. Use the BC Permit Reality Check before you start your next job.

    Quick Poll

    Have you ever seen a small shortcut turn into a big repair?

    Keep the notebook open

  • Cheap Materials That Cost More Later

    Cheap Materials That Cost More Later

    Last updated: May 8, 2026

    Cheap is not the enemy.

    Wrong cheap is the enemy. There is a difference.

    The quick answer

    Use budget materials where failure would be annoying, not dangerous. Do not cheap out where water, structure, heat, height, electrical, gas, vehicle safety, or code is involved. The cheapest part of a job can become the most expensive part if it fails.

    Human Salt

    Construction and DIY taught me that “good enough” is sometimes fine and sometimes a warning siren. The trick is knowing which one you are dealing with before the wall is closed, the ladder is up, or the weather gets in.

    The scaffolding D’oh taught me to respect small choices. A simple miss can change the day.

    The mistake people make

    They judge the material by the price tag instead of the job it has to do.

    A cheap trim board might be fine in the right place. A cheap fastener, seal, hose, bracket, or safety part in the wrong place can cost you twice.

    The better move

    1. Ask what happens if this part fails.
    2. Spend more where failure causes water, fire, injury, or code trouble.
    3. Save money on cosmetic parts when safe to do so.
    4. Read the manufacturer instructions before substituting materials.
    5. When in doubt, ask someone qualified before closing the job up.

    Watch the line

    Do not treat internet shortcuts as permission to ignore building code, manufacturer instructions, or safety requirements. Cheap is fine. Unsafe is not.

    Homer’s bottom line

    Save money where it is smart. Spend money where failure gets ugly.

    Planning a job that needs permits? Run the BC Permit Reality Check before you start swinging a hammer.

    Quick Poll

    Have you ever seen a small shortcut turn into a big repair?

    Keep the notebook open

  • Permit Common Sense: When Nobody Will Notice Is a Bad Plan

    Permit Common Sense: When Nobody Will Notice Is a Bad Plan

    Last updated: May 8, 2026

    “Nobody will notice” is not a plan.

    It is a sentence people say when they already know they are cutting a corner.

    The quick answer

    If a job touches structure, electrical, plumbing, gas, major exterior work, rental safety, insurance, or resale value, check the permit rules before you start. A permit can feel like a pain until the missing permit becomes the expensive part.

    Human Salt

    Job sites taught me that the part you skip is often the part that comes back later. It might come back during an inspection, an insurance claim, a sale, a repair, or a failure.

    The Watch Your Step idea applies here too. Before you move, know where the next step lands.

    The mistake people make

    They think a permit is only about getting caught.

    That is too small. Permits are also about safety, documentation, insurance, resale, and knowing the job was checked against the rules where you live.

    The better move

    1. Check your local rules before starting.
    2. Write down what the job actually changes.
    3. Ask whether inspections are required.
    4. Keep receipts, photos, and permit paperwork together.
    5. Do not bury work that should be inspected first.

    Watch the line

    Rules change by location. This is common-sense guidance, not legal or building-code advice. If the job matters, check with your local authority or a qualified professional.

    Homer’s bottom line

    The shortcut nobody notices can become the problem everybody notices later.

    Planning a job that needs permits? Run the BC Permit Reality Check before you start swinging a hammer.

    Quick Poll

    Have you ever seen a small shortcut turn into a big repair?

    Keep the notebook open